How it works
A male-female bracket set, locked tight by a single set screw. The result: 6× the holding power of the industry standard – engineer tested and pro approved.
Two brackets that lock together.
The Hovr Bracket System pairs two high-grade aluminum brackets – one concealed inside the back of the shelf, one mounted to the studs – that interlock and fasten together for unparalleled strength.
Our main extrusion comes in Classic and Slim, with a custom-bent Steel Bracket for the projects that truly push the limits. The Hovr Classic averages 300 lbs at an 8-inch depth.*
The old 2-prong standard
Two rods balanced in drilled holes, held by friction alone. Bump it wrong and the whole shelf comes down. Out with the old.
The Hovr Classic
Interlocking aircraft-grade aluminum, anchored to the studs and locked with a set screw. In with the new.
Simple to install.
Channel your shelf, put the bracket on the wall, connect the two, and set the screw. We make a template for every step.
Channel your shelf
Rout the channel into the back of your shelf so the bracket tucks inside the wood. Our template shows you exactly where it goes.
Put the bracket on the wall
Screw the matching bracket into your studs through any wall – drywall, plaster, brick, or concrete. The template lines the holes up for you.
Connect the two
Slide the shelf down onto the wall bracket so the two halves lock together. Works the same on Classic and Slim.
Set the screw
Tighten the set screw from underneath and you're done. It won't shift, slip, or sag – and it comes back off if you ever need it to.
The current standard vs. the Hovr Bracket System.
What changes when you stop relying on two prongs and a prayer.